Product Description
63" x 24" Electric Sit-Stand Desk. 28.35" to 46.46" Height Range. 3 Memory Presets. 154 lbs Capacity. Under 55dB Motor. Anti-Collision. EPA/CARB Compliant.
The JHK 63" x 24" Electric Standing Desk is a full-size sit-stand workstation with electric height adjustment from 28.35" to 46.46", covering seated and standing positions for users from approximately 5'0" to 6'4". The spacious 63" x 24" desktop provides ample room for dual monitors, a laptop, keyboard, and accessories. A robust T-shaped steel frame supports up to 154 lbs. Three programmable memory presets let you save your exact sitting and standing heights - switch between them with one button press. The quiet motor operates under 55dB - quieter than normal conversation. Anti-collision technology and a safety lock prevent desk movement when obstructed. Desktop is EPA and CARB compliant engineered wood. Two-piece tabletop requires assembly. Available in Oak, Black, White, and Rust. Ships from United States.
Note: The tabletop comprises 2 pieces that require assembly and connection. All tools and instructions included. Installation video provided.
Key Features
- Electric height adjustment - 28.35" to 46.46" (72cm to 118cm) - 18.11" of vertical travel covers seated height for users approximately 5'0" tall through standing height for users approximately 6'4" tall; electric motor raises and lowers the desk at the press of a button - no manual cranking; smooth continuous adjustment to any height within the range
- 3 programmable memory presets - Save your exact preferred sitting height, standing height, and a third custom position to the three memory buttons; press the S button then a numbered button to save; press the numbered button to recall - desk moves automatically to the saved height without readjustment; eliminates the guesswork of finding your preferred height each time you switch positions
- 63" x 24" desktop - EPA and CARB compliant - 63 inches wide and 24 inches deep; wide enough for dual 27" monitors side by side plus keyboard and accessories; EPA and CARB (California Air Resources Board) compliance means the engineered wood desktop meets strict formaldehyde emission standards for indoor air quality; 2-piece tabletop ships flat and joins during assembly
- T-shaped steel frame - 154 lbs weight capacity - T-shaped crossbar base provides front-to-back and lateral stability at all heights; steel construction; 154 lbs (70 kg) capacity comfortably supports dual monitors, desktop PC, monitor arms, and accessories simultaneously; no wobble under typical office loads when properly assembled
- Quiet motor - under 55dB - 55dB is approximately the volume of a quiet conversation or background office noise; the desk can be raised and lowered in open offices, shared workspaces, and home environments without disturbing others; motor is rated for repeated daily use cycles
- Anti-collision technology + safety lock - Anti-collision sensor detects resistance during desk movement and stops the motor automatically to prevent damage to items under the desk or injury; safety lock holds the desk at its current height in the event of a power interruption during movement - the desk does not drop when power is lost
- 4 color finishes - Oak, Black, White, Rust - Oak: warm wood-grain finish for natural or Scandinavian office aesthetics; Black: matte dark finish for modern or minimal setups; White: clean bright finish for light-colored offices; Rust: warm terracotta tone for design-forward or eclectic workspaces
- Easy assembly - tools and video included - All necessary hardware and tools included in the box; step-by-step instruction manual plus access to an installation video for guided setup; typical assembly time is 30-60 minutes with one person
- Ships from United States
Specifications
- Brand: JHK
- Desktop Size: 63" x 24" (160cm x 61cm)
- Height Range: 28.35" to 46.46" (72cm to 118cm)
- Height Adjustment: Electric motor
- Memory Presets: 3
- Weight Capacity: 154 lbs (70 kg)
- Motor Noise: Under 55dB
- Frame: T-shaped steel
- Desktop Material: Engineered wood, EPA and CARB compliant
- Tabletop: 2-piece (assembly required)
- Anti-Collision: Yes
- Safety Lock: Yes (holds position on power failure)
- Colors Available: Oak, Black, White, Rust
- Storage: None
- Rollers: None
- Ships From: United States
Frequently Asked Questions
What height range does this desk cover and will it work for my height?
The desk adjusts from 28.35" (72cm) at its lowest to 46.46" (118cm) at its highest - a range of 18.11". As a general guide: the sitting height is typically set to elbow height when seated (approximately 26"-30" for most people), and the standing height is set to elbow height when standing (approximately 38"-48" depending on your height). For seated use, the 28.35" minimum suits users approximately 5'0" and taller comfortably with a standard chair. For standing use, 46.46" maximum suits users up to approximately 6'3"-6'4" at proper ergonomic standing elbow height. Very tall users (6'5" and above) may find the maximum height limiting for optimal standing ergonomics. If in doubt, measure your elbow height while standing with arms relaxed at your side and confirm it falls within 28" to 46".
How do the 3 memory presets work?
The control panel has numbered memory buttons (1, 2, 3) and a Save (S) button. To save a preset: adjust the desk to your desired height using the up/down buttons, then press and hold S until the display flashes, then press the memory button number you want to assign that height to. To recall a preset: simply press the numbered button - the desk automatically moves to the saved height without holding the button. You can save your sitting height to button 1, standing height to button 2, and a third position (such as a bar stool height or a collaborator's preferred height) to button 3. Presets are retained in memory and do not reset when the desk is powered off.
How difficult is assembly and how long does it take?
Assembly involves attaching the T-shaped steel legs to the frame crossbar, connecting the motor cable and control panel wiring, and joining the two tabletop pieces onto the frame. All tools and hardware are included - no additional tools are needed. The instruction manual provides step-by-step guidance, and an installation video is available for visual reference. Most users complete assembly in 30-60 minutes alone; having a second person makes lifting and aligning the tabletop pieces significantly easier. The 2-piece tabletop joins with connecting bolts at the seam - once assembled, the joint is tight and does not flex during normal use.
Is this desk stable at standing height with monitors on it?
The T-shaped steel frame is engineered for stability at all heights within the adjustment range. At maximum height (46.46"), the desk will have slightly more sway than at seated height - this is normal for electric standing desks and is influenced by load placement and floor levelness. For maximum stability: ensure all leveling feet are in full contact with the floor and adjusted if the floor is uneven; keep heavier items (monitors, PC) centered on the desk rather than at the far edges; use the desk on a hard flat floor rather than thick carpet where possible. A monitor arm anchored to the desk back rail (if available) or a freestanding monitor arm reduces cantilever load. Under normal dual-monitor office loads, the desk is stable for typing and mouse use at standing height.
What does EPA and CARB compliance mean for the desktop material?
CARB (California Air Resources Board) Phase 2 compliance means the engineered wood desktop has been manufactured to meet strict limits on formaldehyde emissions - one of the primary indoor air quality concerns with wood composite furniture. EPA compliance (TSCA Title VI) mirrors CARB Phase 2 standards at the federal level. In practical terms, a CARB/EPA compliant desktop off-gases significantly less formaldehyde than non-compliant alternatives, making it safer for enclosed home offices and indoor workspaces. This is particularly relevant if you work in a small room with limited ventilation. CARB compliance is required for furniture sold in California and is widely recognized as the benchmark for safe indoor wood composite products across the US.
Does the desk retain its height settings if it loses power?
Yes - the safety lock feature holds the desk at its current height position if power is interrupted during operation. The desk does not drop or collapse when power is lost mid-movement. Memory presets are also retained in non-volatile memory and do not need to be reprogrammed after a power outage or when the desk is unplugged and moved. If the desk ever needs to be reset (for example after a collision event triggers the safety stop), unplug the power cord, wait 30 seconds, and plug back in - then use the down button to lower the desk to its minimum height to complete the reset cycle before normal use.