Product Description
Discover fast, reliable detection for keyless-entry systems with this handheld PKE LF transponder coil locator. Ideal for automotive technicians and locksmiths, it pinpoints low-frequency (125 kHz) antenna coils so you can test coils, start a car with a dead remote, or prepare for key cloning and programming.
Specifications:
- Product Type: PKE LF Transponder Coil Locator / LF Antenna Detector
- Functions: Scan and locate PKE/PEPS LF transponder coil; detect keyless entry LF antenna; car key cloning auxiliary tool; transponder coil tester
- Detection Frequency: 125 kHz
- Max Detection Distance: 5–10 cm (≈2–4 in), varies with signal strength
- Power Supply: 2 × 1.5V AAA batteries required (not included)
- Voltage: 3V (total)
- Standby Current: 12 mA @ 3V
- Auto Sleep: 3 minutes without detection
- Indicators: Multi-LED signal strength display with buzzer (more beeps = stronger signal)
- Material: Plastic
- Compatibility: Cars with Engine Start/Stop one-touch start (PKE/PEPS systems)
- Included: Locator device only — batteries not included
- Note: Only suitable for vehicles equipped with one-touch start systems
Overview & Benefits: This portable locator provides quick, non-invasive detection of low-frequency transponder coils used by modern keyless entry systems. It helps identify coil location in door handles, dashboards, and center consoles, verifies coil functionality (full red LED + beep when working), and enables starting a vehicle when the remote battery is dead by placing the remote near the detected coil. No computer required — an essential tool for car electronic maintenance and locksmith tasks.
Quick Use Guide:
- Install Batteries: Insert 2 × AAA 1.5V batteries (not included).
- Power On: Long-press the ON/OFF button to turn the device on (half red LED + beep indicates standby).
- Locate Coil: Move the locator around instrument panel and interior while pressing the vehicle's Engine Start/Stop button periodically. Beeps increase and LEDs fill when within 5–10 cm (≈2–4 in) of the coil.
- Test Coil: Place the locator near the "key" mark or suspected coil location and press Engine Start/Stop. Full red LED + beep = coil working; no response = coil may be broken or absent.
- Start with Dead Remote: Once coil is found, place the car remote near the coil and press Engine Start/Stop to start the engine.
Who Should Use It: Automotive technicians, car locksmiths, and DIY car owners working with keyless entry, transponder testing, or key cloning.
Hashtags: #CarKeyTester #PKETransponder #FanzyMarket
