Product Description
iGPSPORT M80 Out-Front Bike Computer Mount. Weight: 49g. Extension: 85mm. Material: High-Quality Plastic. Design: Out-Front, Ergonomic. Compatible: All iGPSPORT GPS Cycling Computers (BSC100S, BSC200, BSC300, iGS630, iGS630S, iGS320, and full iGPSPORT lineup). Ships from United States.
The iGPSPORT M80 is an out-front handlebar mount extender designed specifically for iGPSPORT GPS cycling computers. At 49g and 85mm of forward extension, it positions your bike computer in front of the handlebar stem for an unobstructed line of sight to the screen without looking down into the cockpit. Made from high-quality plastic with an ergonomic form, the M80 is compatible with the full range of iGPSPORT GPS computers including the BSC100S, BSC200, BSC300, iGS630, iGS630S, iGS320, and all current iGPSPORT models. Ships from the United States.
Key Features
- Out-front position - 85mm extension - unobstructed screen view - The out-front design extends the computer 85mm forward of the handlebar, centering it in the rider's natural sightline rather than tucking it behind the stem or bars; this positioning improves visibility of speed, distance, cadence, and navigation data at a glance without requiring the rider to drop their head; out-front mounting is the preferred position for road, gravel, and triathlon cyclists who monitor their computer frequently during rides; the 85mm extension length places the display in the aerodynamic center of the cockpit area, clear of handlebar tape, brake levers, and bar bag attachments
- 49g - lightweight plastic construction - At 49g the M80 adds negligible weight to the bike; for reference, a standard plastic water bottle cap weighs approximately 5g, so the M80 adds the equivalent of about 10 bottle caps to the front of the bike - imperceptible in riding; the high-quality plastic construction is UV-resistant and impact-tolerant for outdoor cycling conditions; plastic also avoids the galvanic corrosion risk that can occur between aluminum mounts and aluminum handlebars in wet conditions over time
- Full iGPSPORT compatibility - BSC100S, BSC200, BSC300, iGS630, iGS630S, iGS320, and all iGPSPORT models - The M80 uses iGPSPORT's proprietary mounting interface, which is consistent across the full current iGPSPORT GPS computer lineup; confirmed compatible models include the BSC100S, BSC200, BSC300, iGS630, iGS630S, and iGS320; the mount also works with all other current iGPSPORT GPS cycling computers that use the standard iGPSPORT twist-lock or slide-lock mount interface; it is not compatible with Garmin, Wahoo, Bryton, or other brand computers which use different proprietary mounting systems
- Easy installation - secure hold during rides - The M80 clamps to the handlebar using a standard band clamp mechanism and the iGPSPORT computer locks into the mount head using the same attachment system as iGPSPORT's included mounts; no tools are required to attach or remove the computer from the mount during a ride; the mount itself requires a screwdriver or hex key to install on the handlebar - confirm the required tool with the product packaging; once installed and tightened, the mount is stable on cobblestones, gravel, and rough road surfaces without the computer vibrating loose
Specifications
- Brand: iGPSPORT
- Model: M80
- Weight: 49g
- Extension: 85mm
- Material: High-quality plastic
- Mount Type: Out-front handlebar extender
- Compatibility: All iGPSPORT GPS cycling computers
- Compatible Models: BSC100S, BSC200, BSC300, iGS630, iGS630S, iGS320, and all iGPSPORT models
- Ships From: United States
Frequently Asked Questions
Is the M80 compatible with my specific iGPSPORT computer model?
The M80 is designed for the full iGPSPORT GPS cycling computer lineup and uses iGPSPORT's standard mounting interface. Confirmed compatible models include the BSC100S, BSC200, BSC300, iGS630, iGS630S, and iGS320. If your iGPSPORT model is not on this list, it is almost certainly still compatible as long as it uses the standard iGPSPORT mount attachment system - all current iGPSPORT GPS computers use the same interface. The M80 is not compatible with Garmin, Wahoo Elemnt, Bryton, CatEye, or any other brand's cycling computers - those brands use proprietary mount systems that are physically different from iGPSPORT's. If you are unsure about your specific model, confirm with iGPSPORT's own compatibility documentation or contact the seller before purchasing.
What handlebar diameter does the M80 fit and how is it installed?
The listing does not specify the handlebar diameter range for the M80's clamp. Standard road bike handlebars are 31.8mm (most common) or 26mm (older or budget bars); MTB bars are typically 31.8mm or 35mm. Contact the seller before ordering to confirm which handlebar diameter the M80 clamp accommodates. Installation involves clamping the M80 base to the handlebar center section (the flat area between the stem clamp and the bar curve) using the provided clamp and fasteners - typically a single hex bolt tightened to the handlebar; then the iGPSPORT computer slides or twists into the mount head using the same motion as the original included mount. No permanent modification to the bike is needed and the M80 can be transferred between bikes easily by unclamping from one handlebar and clamping to another.
Why use an out-front mount instead of the standard mount that came with my iGPSPORT computer?
The standard mount included with most iGPSPORT computers positions the computer on top of or behind the stem, which requires looking slightly downward and inward to view the screen. An out-front mount like the M80 extends the computer 85mm forward of the handlebar, placing it directly in the center of your forward sightline - you can read the display with a minimal eye movement rather than a full head dip. For riders who check their computer frequently (monitoring power, pace, heart rate, or turn-by-turn navigation), the out-front position reduces the time eyes are off the road ahead and reduces the neck movement needed to glance at the screen. Out-front mounting also clears the computer of handlebar tape, brake levers, and accessory mounts that can block the screen view when the computer is positioned behind the stem. For triathlon and time trial positions, an out-front mount keeps the computer visible from an aerodynamic tuck without requiring the rider to sit up.
Does the M80 work with lights, cameras, or accessories mounted below the computer?
The listing does not detail additional mounting points below the M80's computer platform. Some out-front mounts include a secondary Garmin-standard accessory slot underneath the main computer platform for attaching a front light, action camera, or additional sensor. Whether the M80 includes such an accessory slot is not confirmed in the available listing information - contact the seller to confirm whether the M80 has an underside accessory mount and what standard it uses (GoPro 1/4", Garmin quarter-turn, or other) before purchasing if a combo mount for light + computer is part of your planned setup.
Can I move the M80 between multiple bikes easily?
Yes - the M80's handlebar clamp uses a standard bolt fastening that requires a hex key or screwdriver to install or remove, which takes approximately 1-2 minutes per bike; no permanent modification is made to the handlebar. Once unclamped, the entire M80 unit moves to a new handlebar and re-clamps in the same way. Your iGPSPORT computer detaches from the mount head in seconds using the same twist or slide motion as the original mount. This makes the M80 practical for riders with multiple bikes (road + gravel, race + training) who want out-front positioning on each bike without buying a mount for every bicycle - simply move the M80 to whichever bike you are riding and the computer transfers with it.