Floriani Fusible Bold Cutaway 20" x 10 yds
Available Offers
Fastest Delivery Tomorrow With Vip DealOrder within 1 hr 8 mins.
Instant 10% Discount On HDFC Banks Credit/Debit Cards EMI and CreditCard
Couldn't load pickup availability
Product Details
Flight Range: Up to 1,000 meters (3,280 feet)
Maximum Speed: 45 kilometers per hour (28 miles per hour)
Shipping And Return
For all orders exceeding a value of 100USD shipping is offered for free.
Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.
Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.
Product Description
Floriani Fusible Bold Cutaway 20" x 10 yds
Floriani Fusible Bold Cutaway 20" x 10 yds
Floriani® Fusible Bold Cutaway is a very soft, yet solid stabilizer that will support medium to heavy stitch count designs. It is ideal for fabrics that are considered unstable. With its light fusible coating, it is ideal for knits that tend to distort or stretch during hooped embroidery. By fusing the stabilizer to the back of the garment, embroiderers are more successful in hooping and the fabric is not stretched out of shape!
Use on non-stable stretch fabrics.
• Will support a professionally digitized design up to 17,000 stitches.*
• Super soft feel makes it ideal for sweatshirts, fleece, and sweater knits.
• This fusible version eliminates the need for spray adhesives or basting.
*For higher stitch count designs float a layer of Bold-tearaway under the hoop for support.
To use Floriani Fusible Bold Cutaway:
1) Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
2) Place the stabilizer to the wrong side of the fabric, fuse and hoop. Use a low to medium temp, dry iron (260° F (120°C) Silk Setting) to adhere to stabilizer to the back side of the fabric. Avoid touching fusible coating with the iron. Use a pressing cloth if necessary.
3) Place the embroidery frame on the machine and complete the design.
4) Once the design is complete, remove the hoop from the machine and trim the stabilizer close to the design. Apply heat then pull stabilizer to the design’s edge before trimming.
**NOTE: All irons heat differently. The iron temperature given above is a starting point. Slowly increase iron temperature as needed until a good bond is achieved between the fabric and stabilizer.
