Floriani Heat N Gone Topping 10in x 10 yds

Floriani Heat N Gone Topping 10in x 10 yds

Floriani Heat N Gone Topping 10in x 10 yds

Use this remarkable 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 260°-300° F (120°-140° C). Great when giving a gift and you need instant stabilizer removal or when your fabric cannot withstand moisture. Trace intricate quilt patterns or designs that you want to free motion stitch for a perfect guide to follow on top of the fabric!

To use as a topping:

• Place a piece of Floriani Heat N Gone on top of the hooped item, bumpy side down, and secure with pins or tape.
• Once the embroidery is complete, tear away as much of the Heat N Gone as possible.
• Place your heated iron to the top of the garment to remove the excess stabilizer.
• Be sure your iron temp is a least 260° F (120°C).

To use as a stabilizer:

• Place a piece of Heat N Gone within the hoop with the item to be embroidered.
• Use a piece at least one inch larger than the outer perimeter of the hoop.
• The bumpy side of the stabilizer should be against the fabric.
• Once the embroidery is complete, tear away as much of the Heat N Gone® as possible.
• Follow the steps above for removing any remnants left around the design.