Product Description
Portable. Foldable. 0.01mm Precision.
The Artilume D2 is a compact, foldable desktop laser engraver built for home workshops, small studios, and DIY creators. The high-strength aluminum frame folds flat for easy storage and travel. A 200×150mm engraving area handles most small-to-medium project sizes, with a 0.12mm laser spot and 0.01mm engraving accuracy for sharp, detailed results. Engraving speed reaches 10,000mm/min. Compatible with LightBurn, LaserGRBL, and a dedicated mobile app for both desktop and phone control. Works on wood, leather, metal, coated stainless steel, paper, cardboard, and more. Available in 2.5W and 6W laser power. Ships from the United States.
⚠️ First-use note: Before powering on, locate and remove the small protective tape covering the limit switch on the laser head assembly. Failure to remove it may prevent correct homing or trigger an alarm. Contact support if you need help during setup - response within 24 hours.
Key Features
- Foldable, portable design - Aluminum profile frame folds flat for compact storage in a drawer or bag; set up and pack down in under a minute; ideal for small workspaces, apartments, and makers who need to move their setup
- 200×150mm engraving area - Handles business cards, phone cases, small wood panels, leather patches, jewelry tags, coasters, and similar small-to-medium projects; precise enough for detailed artwork and text
- 0.12mm laser spot - 0.01mm engraving accuracy - Fine laser spot size for sharp edges and intricate detail; 0.01mm positioning accuracy ensures consistent, repeatable results across a work session
- 10,000mm/min engraving speed - Fast work speed for efficient batch production and multi-pass engraving; significantly faster than lower-speed entry-level machines
- LightBurn + LaserGRBL + mobile app support - LightBurn (Windows/macOS) is the industry-standard laser design and control software with the widest feature set; LaserGRBL (Windows, free) is a popular open-source alternative; the mobile app allows phone-based control and simple design import for users who prefer a no-PC workflow
- 2.5W or 6W laser power options - 2.5W is ideal for engraving wood, leather, paper, and coated surfaces; 6W adds deeper engraving capability on denser wood and coated metals, and faster overall work speed; choose based on your primary materials and depth requirements
- Engraves wood, leather, metal, stainless steel, paper, cardboard - Broad material compatibility; coated/anodized metals and stainless steel can be marked without additional spray; uncoated bare metals typically require marking spray for best results
- High-strength aluminum + ABS plastic frame - Rigid enough for accurate motion, light enough for portability; durable construction for regular use
- USB wired data connection - Stable, low-latency connection to your computer via USB; no Wi-Fi setup required for desktop use
- Smart device compatible - Mobile app control for wireless operation from a phone or tablet
- CE certified. Ships from United States.
Power Variant Guide
- 2.5W - Best for engraving wood, plywood, MDF, leather, paper, cardboard, and coated surfaces; lighter, lower heat output; recommended for beginners and general craft use
- 6W - Higher power for faster engraving, deeper cuts on dense wood, and more effective marking on coated metals and harder materials; recommended for users who need more throughput or work with tougher materials regularly
Compatible Software
- LightBurn (Windows, macOS) - Paid, industry-standard; supports SVG, DXF, AI, PNG, JPG, and more; full vector and raster engraving control
- LaserGRBL (Windows) - Free, open-source; great entry point for beginners; bitmap and G-code based workflow
- Mobile App (iOS/Android) - For wireless job control and simple design import directly from your phone
Specifications
- Brand: ARTILUME
- Model: D2
- Engraving Area: 200×150mm
- Laser Spot: 0.12mm
- Engraving Accuracy: 0.01mm
- Engraving Speed: Up to 10,000mm/min
- Laser Power: 2.5W or 6W (select variant)
- Frame Material: High-strength aluminum profile + ABS plastic
- Design: Foldable, portable
- Software: LightBurn (Win/Mac), LaserGRBL (Win), Mobile App
- Connection: USB to serial (wired)
- Smart Device: Yes (app control)
- Package Weight: 2.9kg
- Package Size: 43×21.3×14.5cm
- Certification: CE
- Ships From: United States
Frequently Asked Questions
What is the difference between the 2.5W and 6W variants and which should I choose?
Both variants use the same D2 machine frame, motion system, and software compatibility - the only difference is the laser module power output. The 2.5W variant is well-suited for engraving wood, plywood, MDF, leather, paper, cork, and coated surfaces like anodized aluminum phone cases. It produces clean, detailed engravings on these materials at good speed. The 6W variant provides higher laser intensity for faster engraving on the same materials (fewer passes needed for the same depth), deeper engraving on denser hardwoods, and more effective marking on coated metals and harder surfaces. If you primarily work with soft materials and want an affordable entry point, 2.5W is sufficient. If you plan to work with a wider range of materials, want faster throughput, or need deeper engraving, 6W is the better choice.
What materials can the Artilume D2 engrave and cut?
The D2 can engrave: wood (pine, plywood, MDF, bamboo, balsa), leather, cork, paper, cardboard, fabric, rubber stamps, anodized aluminum, coated metals, and painted/coated stainless steel. For cutting (depending on power and material thickness): thin paper, thin cardboard, thin leather, and thin balsa wood at low thicknesses. The D2 cannot engrave or cut bare uncoated metals without marking spray (a cermark or similar marking compound applied to the surface first). It cannot engrave transparent acrylic, glass, or ceramic without specialized coatings. Always test on a scrap piece of your material before committing to a final project.
Do I need LightBurn or can I use the free LaserGRBL software?
Both are supported and either works for operating the D2. LaserGRBL is completely free and handles bitmap engraving (photos, raster images) and basic G-code workflows well - it is a solid choice for beginners who want to start without cost. LightBurn is a paid application (one-time license fee, approximately $60 USD for the Gcode tier) that adds support for vector graphics (SVG, DXF, AI files), advanced fill and cut settings, camera overlay, shape tools, and a generally more polished workflow. Most serious hobbyists and small business users find LightBurn's additional features worth the cost. The mobile app is the simplest option for basic jobs without a computer. You can start with LaserGRBL or the app and upgrade to LightBurn later if needed.
What does the protective tape warning mean and what happens if I don't remove it?
During shipping, a small piece of protective tape is applied over the limit switch on the laser head assembly to prevent accidental triggering during transit. Before powering on the D2 for the first time, you must locate this tape and remove it. The limit switch is what the machine uses to find its home position (the starting reference point) when it initializes. If the tape is left on, the machine cannot correctly detect the switch position - it may fail to home, move in the wrong direction, or trigger an error alarm on startup. Removing the tape takes only a few seconds. Check the laser head area carefully on first unboxing and peel off any tape you find on or near the switch before turning the machine on.
How precise and fast is the D2 compared to other entry-level laser engravers?
The D2's 0.01mm engraving accuracy and 0.12mm laser spot size place it at the higher end of mini/portable laser engravers. For comparison, many basic entry-level machines have laser spots of 0.2-0.5mm and lower positioning accuracy, resulting in softer edges and less fine detail. The 10,000mm/min maximum speed is also fast for this machine class - comparable to mid-range desktop engravers. In practice, engraving speed varies by material (softer materials allow faster passes) and design complexity (more detail = slower effective speed). For a foldable, portable machine at this price point, the D2's accuracy and speed specs are competitive with fixed-frame machines in the same power class.
Can I use the D2 without a computer using the mobile app?
Yes - the mobile app allows you to control the D2 and send engraving jobs from your phone or tablet without a PC. You can import images from your phone's camera or gallery, adjust basic settings, and start engraving jobs wirelessly. The app is best suited for simple engraving tasks like logos, text, and basic graphics. For complex vector designs, multi-layer projects, or precise G-code control, the desktop software (LightBurn or LaserGRBL) provides significantly more control and flexibility. The mobile app is a convenient option for quick jobs or when your computer is not nearby.